Hydroponic Lighting Ballast (MH/HPS-400W/600W/750W/1000W)

Harvest Digital Electronic Dimmable Ballast:
1, Both light metal Halide and High Pressure Sodium Bulbs
2, Run at 100%, 75% or 50% power
3, Input voltage: 100~308Volt
4, Operates both HPS & MH lamps
5, Dimming function is optional
6, Has a 99.9% power factor
7, Internal resin coating & Fan cooling
8, Matel case color: Silver gray, Green, Red
9, The most stable output frequency of any ballast
10, Higher lumen output than magnetic ballasts
11, Internal resin coating protects components for long life
12, Light weight and care free
13, Generator compatible
14, Three years no hassle warranty!

Digital Electronic ballast for HPS/MH lamp
Model # MH / HPS-1000W
Specification Parameters
Strike voltage 4kV max
Required lamp voltage 90~150V
Voltage input range 100Vac~268Vac
Rating V. In 120/220/230/240Vac
Input frequency 50Hz~60Hz
Power factor >0.99
Efficiency 95 %( Max)
THD <10%
Output power 1000W/750W/500W (Optional dimming) (75%/50% dimming on requiring)
Current crest factor <1.5
Output frequency >30K Hz
Protection of short circuit Yes
Protection of open circuit Yes
Protection of ignition failure Yes
Protection of thermal Yes
Protection of end of lamp life (EOL) Yes
Weight 3kg/6.6pounds
Max. Lamp distance from ballast 15m/49ft
Operating temperature range -40~+60degree
Dimension (L x W x H) 391x121x73.2(mm)/dimming395x121x73.2(mm)
Max case temperature (T C) 90degree
Safety and regulation IEC61347
EMC EN55015